CYC Photon - 250W EPAC Compliant eBike Torque Sensing Mid Drive Conversion Kit
Please note a motor output exceeding 250w and speed assistance exceeding 15.5mph means it cannot be used on UK public roads without first obtaining type approval, insurance, tax, displaying a number plate and undergoing an MOT.
In the UK, only converison kits that comply with EAPC Regulations can be used on UK public roads without tax, insurance or registration. A conversion kit above 250W can only be used off-road on private land.
You can find out more about EAPC Regulations here: https://www.gov.uk/electric-bike-rules.
For the avoidance of doubt, you will be responsible for obtaining such type approval, insurance, tax, registration and MOT.
Once a kit has been fitted, a refund can't be processed as the item has been used.
Please contact us before ordering to make sure the kit will work on your bike.
Cycle to work Scheme
The Cycle to Work Scheme is a Government-backed initiative to encourage people to cycle to their place of work, and consequently reduce environmental pollution. It's also a way for you to save money on the cost of your cycle and spread the cost over a number of months, through your pay packet.
How do I get a conversion kit through Cycle to Work?
If they haven't already, your employer needs to register with one of the Cycle to Work Schemes in order to offer this benefit to their employees. Once they are signed up with a scheme, the employee needs to find a cycle retailer who is also registered with that scheme.
Electric Bike Conversions is registered with four of these schemes - Bike2Work, Cycle Scheme, Green Commute Initiative and CyclePlus. You'll see our name listed on each of these schemes such as Earth Cycles or Bike Bros. These are other names we trade under, but we are the same company.
The paperwork required differs for each scheme and should be available from your employer or from the links below for each scheme:
Green Commute Initiative - Our recommendation!
Once the necessary paperwork is completed you will usually be issued with a certificate by your employer or Cycle to Work Scheme that you can use to purchase the kit from us. Your employer pays for the conversion kit via the scheme and the scheme then pays us for the purchase once you have collected the kit and provided us with your certificate.
If the kit is being delivered or installed by us, we can receive the certificate digitally. We'll also sometimes ask for proof of ID, depending on the scheme. The cost of the bike is then deducted from your salary over a period of time, but as you don't pay tax or NI on the income that's deducted, you make a saving on what you would pay if you purchased outright. This saving will vary depending on which tax band you fall into!
Due to the cost of running the Cycle To Work Schemes we have to add a 10% fee on top of the kit price, otherwise we cannot afford to be apart of the scheme. Sorry for the inconvenience.
NEW!
The CYC Photon now comes with the EPAC compliant firmware, meaning the motor is rated at 250W and is road legal. It still comes with the whopping 110Nm of torque
The CYC Photon is a compact and lightweight mid-drive electric bike conversion kit made to create a smooth pedal assist feeling that feels natural and seemless. Rated at 250W & 110N.m. Compatible with 36V to 52V battery packs.
NEXT GENERATION EBIKE TECHNOLOGY
Advanced torque sensing technology offers a seamless and intuitive pedal assist experience. With a helical gear design, the quality is uncompromised while giving you a silent ride. Compact and lightweight, the system offers subtlety and adaptability.
CONTROLLER RELIABILITY AND PERFORMANCE
The CYC Photon is now paired with the X-series controller which makes a day and night difference than the previous models. Both the PAS and throttle experience are refined. The following list of issues are addressed with the X-series controller.
- High Initial torque
- Peak power
- Maximum reliability
- No cut-out with full power in bumpy terrain
- Instant throttle response
- Refined torque sensor tuning
- Simplified app
- Fully programmable via display, so using the app is not mandatory
- Plug-and-play
ROTOR CORE & MOTOR
With mechanically retained magnets inside the CYC motors, they are designed to reach high RPMs without failing under heat stress.
Not only are the magnets mechanically secured but CYC used high grade quality magnets that can withstand up to 180 degrees Celsius. Much more than the motor will reach during your ride allowing for ease of mind during any conditions.
ISIS SPLINED CRANKSET
Ensuring you have a durable crankset is crucial to any ebike. The new integrated torque sensing module has made it possible for us to give you back the ISIS splined crankset so you can rest at ease knowing that no matter how hard you pedal, your crankset will stay secure.
The bottom bracket bearings are now fully sealed to ensure maximum reliability with outdoor use.
WATER RESISTANT
Love a muddy ride? What around rainy days or washing your bike? We've got you covered. We're making sure that our systems are up for the job.
All the previous water ingress point has been sealed properly with the upgrades.
ADVANCED TORQUE SENSING TECHNOLOGY
Patented torque sensor technology offers one of the best pedal assist sensations in the ebike world. Paired with our in-house firmware tuning and a robust sprag clutch, the CYC torque sensor ensures instant engagement and an intuitive pedal assist experience.
NATURAL, SMOOTH RIDING
Equipped with our patent pending torque sensor module, we can give you a refined pedal assist system. The torque sensor module includes both a high sensitivity torque sensor strain gauge module and a cadence sensing module. The high number of poles of the cadence sensor ensures that we can control the sensitivity to a much higher degree & provides the opportunity to fine-tune the firmware alongside rider inputs. The result? Unprecedented ebiking!
ALGORITHM IS EVERYTHING
Our PAS firmware algorithm is like the secret ingredient in a top chef's recipe. Without it, we'd be boring! BUT, we aimed for better, and so, we've accomplished it! Our engineers were put to the test and are proud to present you with an all-new pedal assist experience.
SEALED, INTEGRATED, & BUILT TO LAST
The new Gen 3 PAS (pedal assist system) sits integrated with the robust sprag clutch module so there's no external wiring that can get caught, bent, or accidentally snapped. The CYC PAS runs with both the torque and cadence signal collected and is processed by the controller to provide you with a pedal assist feeling like never before.
NEXT GENERATION ELECTRONICS
The latest X-Controller series is built to give you ultimate freedom. In-house firmware optimizes the throttle and pedal assist experience. Paired with the CYC Ride Control mobile app, you can unleash all the possibilities at your fingertips.
The mobile app is not the only way to customize your system. The controller is also programmable via the included display. Integrated for your convenience.
X-SERIES CONTROLLERS - UNLEASH CYC MOTOR POTENTIAL
Instant torque and power, stable off road performance, responsive throttle, refined pedal assist experience, the X-series controllers are the key components to power all CYC motor systems.
Introducing the CYC Ride Control mobile app, aimed to unleash all the possibilities at your fingertips. Experience an advanced settings selection and an on-the-go mode on the horizon.
NEW! A-SERIES BATTERIES
The ideal battery solution for your CYC ebike kit. Ride with only the best ebike battery packs.
CYC designed the A-Series with one goal in mind: providing high-quality, durable, and sleek battery solutions. We know that every trip counts, so why not choose a battery that suitable for whatever you need. Check it out for yourself!